Description

Albany Binstore – Single

Keep your outdoor space looking tidy with the Albany Binstore — a smart, durable solution for hiding away wheelie bins while keeping them easy to access. Built with the same dependable craftsmanship as the rest of the Albany range, it features strong tongue‑and‑groove shiplap cladding, a lift‑up slatted roof, and a front‑opening door for everyday convenience.

Designed to sit neatly in any garden, this binstore provides discreet storage with practical ventilation and a clean, attractive finish. Whether you’re housing one bin or several, it’s a simple way to keep waste containers out of sight without compromising on usability or build quality. 12mm Tongue & Groove cladding, with 45 x 34mm framework. Door is 710mm x 1185mm.

NOTE ** Albany buildings are made from a mixture of whitewood and redwood, and require annual treatment with a solvent-based wood preservative, and should be treated within the first 6 – 12 months of installation, and then annually from then on. All hardwood summerhouse doors & windows must be painted as soon as possible after installation with at least two coats of wood preservative ** 

Specification

• Storage unit suitable for wheelie bins
• Three sizes: Single, Double, Triple
• Slatted lift up roof
• 12mm Tongue & groove shiplap
• 45 x 34mm framework
• Internal height 1.36m – 1.29m
• Door 710 x 1185mm
• Tower bolt
• Doors are on low side, with the roof sloping up to the back

*All sizes are approximate*

Guarantee

Albany buildings come with a 12-month guarantee against faulty parts & workmanship.

Installation & Base Requirements

We offer installation on Albany buildings (location dependent), giving you a stress‑free experience from start to finish.

To enable installation, your building must sit on a flat, level, firm base made from paving slabs or concrete. The base should:

• Match the size of the building (can be larger, but never smaller) – please note that bases larger than the building can cause rainwater to build up around, and under the floor of the building, which can lead to the timber rotting. 
• Be completely flat & level to a spirit level standard, with no drainage slope
• Sit at least 2 inches above ground level to avoid ground water running underneath

** It is the customer’s responsibility to provide a suitable base for their building, with clear and safe access **

Clearance requirements

We recommend at least 18″ of clearance around the building for installation, airflow, and future maintenance. On Albany buildings, we can install with 12″ clearance to up to two adjacent sides. If your requirements are less than this, please get in contact so we can advise.