Description

Albany Wall Shed (End Door) – Slimline, Practical Storage for Tight Spaces

The Albany Wall Shed with end door configuration is a clever, space‑saving storage solution designed to sit neatly against a wall or fence. Built with 12mm tongue‑and‑groove shiplap cladding, a timber floor, and a sloping lean‑to roof, it offers reliable weather protection in a compact footprint. The end‑mounted single door provides easy access in narrow areas where front‑opening sheds won’t fit, making it ideal for side passages, courtyards, and tight garden boundaries.

Despite its slim profile, the Wall Shed is solidly constructed with Albany’s dependable framing and braced door design. The raised floor helps keep contents dry, while the low‑to‑high roofline maximises internal height without overwhelming the space. Available in a range of lengths and depths, it’s a practical choice for storing tools, gardening essentials, and outdoor equipment when space is at a premium.

NOTE ** Albany buildings are made from a mixture of whitewood and redwood, and require annual treatment with a solvent-based wood preservative, and should be treated within the first 6 – 12 months of installation, and then annually from then on. All hardwood summerhouse doors & windows must be painted as soon as possible after installation with at least two coats of wood preservative ** 

Specification

• Free standing storage building
• Tongue & groove shiplap, including floor and roof
• Framed and braced single door
• Door is in one of the narrow ends (specify which end)
• The door size on an end door model is 595mm wide x 1625mm high
• Internal height 1.8 x 1.7m approx.
• External height 1.9m approx.
• 20kg Polyester roofing felt

*All sizes are approximate*

Guarantee

Albany buildings come with a 12-month guarantee against faulty parts & workmanship.

Installation & Base Requirements

We offer installation on Albany buildings (location dependent), giving you a stress‑free experience from start to finish.

To enable installation, your building must sit on a flat, level, firm base made from paving slabs or concrete. The base should:

• Match the size of the building (can be larger, but never smaller) – please note that bases larger than the building can cause rainwater to build up around, and under the floor of the building, which can lead to the timber rotting. 
• Be completely flat & level to a spirit level standard, with no drainage slope
• Sit at least 2 inches above ground level to avoid ground water running underneath

** It is the customer’s responsibility to provide a suitable base for their building, with clear and safe access **

Bearers

Bearers can be added to your order at an additional cost. Bearers are pressure treated / tanalised timbers that raise a shed up off the ground to prevent the floor from getting damp and rotting. They need to be laid on flat, level, compact surface such as paving slabs/concrete).  Bearers should be used if the base is larger than the footprint of the building, or if there is restricted airflow around the building, (i.e. a fence or wall very close to the shed) to avoid rainwater building up and sitting against the floor of the building.

Clearance requirements

We recommend at least 18″ of clearance around the building for installation, airflow, and future maintenance. On Albany buildings, we can install with 12″ clearance to up to two adjacent sides. If your requirements are less than this, please get in contact so we can advise.