Description

Laughton Kennel & Run

A practical, secure kennel and run designed to give dogs a comfortable sheltered space alongside a safe, enclosed outdoor area. The Laughton combines a fully boarded kennel with an integrated mesh‑fronted run, creating a balanced setup that supports both rest and exercise.

Built with 12mm tongue‑and‑groove shiplap cladding, strong 45 x 34mm framing, and a floor on the kennel section, the kennel offers reliable protection from the weather, while the open run provides fresh air and visibility without compromising security.

Sturdy, functional, and easy to place, the Laughton Kennel & Run is an ideal choice for keeping dogs comfortable, contained, and well‑protected in the garden.

NOTE ** Albany buildings are made from a mixture of whitewood and redwood, and require annual treatment with a solvent-based wood preservative, and should be treated within the first 6 – 12 months of installation, and then annually from then on. All hardwood summerhouse doors & windows must be painted as soon as possible after installation with at least two coats of wood preservative ** 

Specification

• Pent roof kennel and run
• 1.2 x 1.2m kennel with floor
• 1.8m or 2.4m run
• 12mm Tongue & groove shiplap cladding
• Sliding door connects kennel to run (370 x 450mm)
• Run is supplied without a floor for hygiene purposes
• Galvanised steel mesh front on run
• 20kg Polyester roofing felt
• Lock & Key (no door handle)
• 45 x 34mm framing
• Internal height 1.67m – 1.52m
• Door 700 x 1450mm

*All sizes are approximate*

Guarantee

Albany buildings come with a 12-month guarantee against faulty parts & workmanship.

Installation & Base Requirements

We offer installation on Albany buildings (location dependent), giving you a stress‑free experience from start to finish.

To enable installation, your building must sit on a flat, level, firm base made from paving slabs or concrete. The base should:

• Match the size of the building (can be larger, but never smaller) – please note that bases larger than the building can cause rainwater to build up around, and under the floor of the building, which can lead to the timber rotting. 
• Be completely flat & level to a spirit level standard, with no drainage slope
• Sit at least 2 inches above ground level to avoid ground water running underneath

** It is the customer’s responsibility to provide a suitable base for their building, with clear and safe access **

Bearers

Bearers can be added to your order at an additional cost. Bearers are pressure treated / tanalised timbers that raise a shed up off the ground to prevent the floor from getting damp and rotting. They need to be laid on flat, level, compact surface such as paving slabs/concrete).  Bearers should be used if the base is larger than the footprint of the building, or if there is restricted airflow around the building, (i.e. a fence or wall very close to the shed) to avoid rainwater building up and sitting against the floor of the building.

Clearance requirements

We recommend at least 18″ of clearance around the building for installation, airflow, and future maintenance. On Albany buildings, we can install with 12″ clearance to up to two adjacent sides. If your requirements are less than this, please get in contact so we can advise.